[China Glass Net] Usually glass bottle production equipment is usually: row machine, manual machine, and pour machine. The process is that one device can combine multiple sets of molds, and the mold has bottle mouth mold, bottle body mold and bottle bottom mold. Matching composition. Mesh Tulle Fabric,Wedding Tulle Fabric,Polyester Tulle Fabric,Mesh And Tulle Fabric Shaoxing Cornfield Textile Trading Co,.Ltd , https://www.cornfieldtextile.com
The number at the bottom of the glass bottle is the number of the mold! In life, it is often found that there are some letters or numbers at the bottom of the glass bottle. For this, we will introduce the bottom number of the glass bottle mold in detail:
Usually, glass bottle production equipment is usually: row machine, manual machine, and smashing machine. The process is that one device can combine multiple sets of molds, and the mold has a bottle die, a bottle body mold, and a bottle bottom mold.
The order quantity of glass bottles is usually less than tens of thousands. In order to increase production time, multiple sets of molds can be produced to produce the same type of glass bottles. After multiple sets of molds are blow molded, they need to be returned to the furnace, from high temperature to high temperature. The low temperature is gradually annealed and cooled to increase the stress between the glass molecules. However, the glass bottles produced by the multiple sets of molds enter the annealing furnace for mixing. We cannot distinguish which set of molds from the shape. The bottom number of the glass mold is usually the letter. Or the number, the letter is usually the short name of the manufacturer's company name or the short name of the buyer's company. When the letter number appears, some numbers will appear, such as: 1, 2, 3, 4, 5, 6... Etc. This number plays a very important role in the manufacture of glass bottles. Therefore, in the packaging process, the sampling test is carried out. If quality problems are found, it is impossible to accurately and accurately determine the quality problem. Therefore, different numbers are numbered at the bottom of the corresponding molds of each group of molds. When some problems are found, we can More timely and accurate identification of the root cause of the problem.