Composite Oxford Cloth is made of one layer or layers of Oxford Cloth which are pasted together with corresponding glue. For example, sofa outside gallbladder is combined by sponge and leather products. For a better understanding, our autumn and winter clothes are also made of Composite Fabric like cotton and polyester material. The composition of the Oxford Fabric can be selected according to different uses Oxford Shirt Fabric,Oxford Canvas Fabric,Twill Compound Cloth,290 Twill Compound Fabric Wujiang City Shishan Textile Co.,Ltd , https://www.shishanrecycle.com
1. Do not make the headboard of the shoe cabinet, leave a little space, so that the gray of the shoes can leak to the bottom. When setting the location of the bathroom floor drain, be sure to think about it first and measure the size. The floor drain is preferably located on one side of the brick. If it is in the middle of the brick, no matter how the brick is tilted, the floor drain will not be the lowest point.
2. Bathroom air conditioning sockets should be designed with switches. In particular, the electric water heater for the bathroom is preferably inserted with a double-stage switch.
3. Regarding the treatment method of the corner of the brick, in the final analysis, it is to see the level of the worker. If the level of the workers is good, and the tools for grinding the tiles are better, you should not hesitate to choose a 45° angle. From the effect point of view, as long as the grinding is good, the practice of grinding the angle of 45 ° angle is the most beautiful. If the level of the worker is really not good, then it is recommended that the owner choose to use the corner strip. Because the bad 45° angle is not as good as the positive angle.
4. It is also very important to test the water pressure after the water pipes are drained. When testing, the owner must be present, and the test time should be more than 30 minutes. If the conditions permit, it is best to test for 1 hour.
5. When installing the steel door, be sure to calculate the size of the steel door frame protruding from the wall and tell the installer that the final door frame and the wall of the tile are flat, both beautiful and easy to clean.
6. The carpentry and tiling mason of the door cover should also cooperate. When packing the door cover, consider whether the ground below (either side of the door on either side of the door) is to be tiled or other cement mortar leveling. Because the door cover is nailed before tiling, it is always wrapped on the ground. When cement is used in the future, if the cement and the door cover are stained, it will cause the door cover wood to absorb water and mold.
7. Be sure to breathe under the mattress and the bed board. The bed board is generally best with fir boards.
8. Make paint as much as possible with paper tape.
9. Pay attention to the purchase of lamps: try to use glass, stainless steel, copper or wooden (shelf). Try not to choose lamps with plating, lacquer, etc. on the iron, which is easy to fade.
10. The basin should be made of ceramic basin as much as possible. The glass basin is not easy to clean.