With the advantages of aluminum alloy doors and windows, more and more families are purchasing at least one or two aluminum alloy doors at home. Although the anti-moist effect of the aluminum alloy door is relatively obvious, Fuxuan doors and windows remind everyone, do not think that the door selection is right, it is very important, maintenance work is also very important. Door and window glass: Wipe clean with a rag padded with vinegar. If the window is stained with oil, spray the glass on the cleaning agent first, then put on the plastic wrap to soften the solidified oil. After ten minutes, tear off the plastic wrap and wipe it with a damp cloth. Door lock: The safety lock with double-sided opening should be purchased. The weight of the lock is compared with the hand. The heavier the nut is, the thicker and harder the material is. On the contrary, the material is thin and easily damaged. Secondly, look at the surface finish of the lock, whether it is fine and smooth, no spots. Repeatedly open to see the sensitivity of the lock core spring. Top ten brands of aluminum alloy doors and windows, door and window joining, door and window agent, door and window investment details landing Fuxuan doors and windows official website: Knitted Jersey,Polyester Fabric Raw Materials,Flower Pattern Knitted Fabrics,Purple Bronzing Fabric Shaoxing Weihui International Trade Co.,Ltd. , https://www.weihuifabric.com
In terms of cleaning, the sliding door relies on the opening of the track control door, which is a major focus of cleaning. The lower rails and the hair strips tend to accumulate dust, or trap tiny dirt, which hinders use. To clean, first use a vacuum cleaner to remove the accumulated dust, then use a rag or sponge, wipe it with water or a neutral detergent, do not use a highly corrosive detergent, and then wash it once with water. It is important to note that if water is found in the track chute, it should be dried in time. In order to enhance the anti-corrosion effect, a thin layer of fire wax oil can be applied to the surface of the track.
In terms of maintenance, there are two main points. Front, the hardware at the interface needs to be checked frequently, including locks, hinges, sealing strips, locating pins and wind braces. These parts are often subject to friction and are more susceptible to rust damage. More inspection, timely replacement of damaged parts, regular addition of lubricating oil, can ensure smoother use of aluminum alloy doors. Second, the sealing top and the glass seal need to be repaired and replaced regularly, otherwise the windproof insulation effect will be reduced. Third, the screws at the joint between the door frame and the wall need to be periodically reinforced to ensure that the door can be closed normally.
In terms of use, the aluminum alloy door pages mainly rely on splicing, embedding and other technical assembly and hinges and other accessories to connect, and the strength will cause deformation, so it is necessary to pay attention to soft push and pull when reminding the usual use. When you are not comfortable, do not use brute force. You should first check whether there are any foreign objects in the track, whether the track is deformed, etc. After a long time of use, the tightness between the parts is reduced, and the push-pull is much smoother than the new door. At this time, it is necessary to pay attention to the excessive force, which is also harmful to the door.
Screens: When cleaning screens, first remove the window screens. Place the removed screen window in the bathtub or next to the bathtub. Rinse gently with a soft water pipe or shower to remove spider webs, dust and other contaminants. Next, install some soapy water in a bucket, soak some soapy water with a short-haired brush, and then gently on the screen. Brush the floor to ensure that the screen is covered with enough soapy foam; later, clean the soap with a soft hose or shower and wait for the air to dry.
Aluminum alloy doors and windows: During the installation and construction of aluminum alloy doors and windows, the protective tape for aluminum alloy profiles is not protected. During construction, the corners of the profile are damaged and the coating is scratched. Therefore, it is necessary to prevent such abnormal corrosion. It is very important to protect the aluminum alloy door and window profiles during the construction process of doors and windows. All operations must be taken to prevent the profiles during the manufacturing process. The surface coating is flawed and bumped. The finished door and window must be wrapped with protective adhesive tape before installation. After installing the wall, personnel should be prohibited from stepping on it. When the scaffolding is required, the door and window frame should be protected by materials such as wood.
The corrosion of the doors and windows with abnormal corrosion is long-term water seepage and wet parts. Therefore, the construction process of aluminum alloy doors and windows needs to be waterproof and moisture-proof. Generally, the gap between the aluminum alloy door and window frame and the wall cavity should be soundproof and moisture-proof. Corrosive materials, such as polyurethane PH foam joint filler, are used for prevention; if cement mortar is used to fill the gap, waterproof mortar should be used. It is strictly forbidden to use sea sand as waterproof mortar.
Door and window hardware tips and maintenance tips:
Cylinder: When the rotation is not flexible enough, a small amount of black powder can be scraped from the pencil lead and lightly blown into the lock hole. This is because the graphite component is a good solid lubricant. Never drop in the oil as it will make it easier to stick to the dust.
Floor spring: The floor spring of the door should be stainless steel or copper. Before it is installed, it should be adjusted before and after the opening and closing speed for easy use. The hydraulic part must not leak oil. A door closer can also be used.
Hinge, hanging wheel, caster: The moving parts may reduce the performance due to the adhesion of dust during long-term movement. One or two drops of lubricant can be kept smooth every six months or so.
In addition, in the usual attention to some of the details of the problem: door leaf - do not hang too heavy items on the door leaf and avoid sharp bumps, scratches, do not use too much force when opening or closing the door leaf; door lock -- Do not open the door lock with wet hands, or splash corrosive solvents on the wooden door and door lock. Do not use excessive force when opening the door lock or turning the door lock handle; hardware accessories - need to pay attention to hinges, door locks, etc. The hardware accessories should be tightened immediately when looseness occurs; glass--When wiping the glass, do not let the cleaning agent or water penetrate into the gap of the glass bead to avoid deformation of the bead. Do not use excessive force when wiping the glass to avoid damage to the glass. After the glass is damaged, please ask the professional to carry out the repair; Facade maintenance--In order to maintain the surface gloss and service life of the wooden door, it should be cleaned and dusted regularly. The surface of the wooden decoration product can be used to maintain the surface.
Mastering some common sense of door and window maintenance is very important for the maintenance of doors and windows. If you can apply some of the above common sense to the maintenance of doors and windows in your home life, I believe that your doors and windows will be longer and more durable, making them more unsound. Accompanied by your side. In addition, when the Spring Festival air is fresh, you may wish to open the window every day to allow fresh air to flow into the room, which will help the maintenance of doors and windows, but also contribute to physical and mental health, but also pay attention to the time to open the window should not be too long, Just a few minutes.